APC Smart-UPS, Line Interactive, 1000VA, Lithium-ion, Rack/Tower, 2U, 230V, 6x IEC C13 outlets, SmartConnect Port+SmartSlot, Short Depth, AVR, LCD
SKU: SMTL1000RMI2UC
Overview
Presentation
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Lead time
Usually in Stock
Main
Main Input Voltage
230 V
Other Input Voltage
220 V
240 V
Main Output Voltage
230 V
Other Output Voltage
220 V
240 V
Kw Rating
800 W
Rated power in VA
1000 VA
Product or Component Type
Uninterruptible power supply (UPS)
Input Connection Type
IEC 60320 C14
output connection type
6 IEC 60320 C13
Number of rack unit
2U
Battery Type
Li-Ion (Lithium Ion)
Provided equipment
Installation guide
Rack Mounting support rails
USB cable
Complementary
Software package
SmartConnect software for remote power monitoring feature availability varies by terms of use
Batteries & Runtime
Run Time
View Runtime Graph
Efficiency
View Efficiency Graph
Battery graph comments
This graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several variables including battery age, battery charge level, environmental conditions and characteristics of the connected load.
Extendable Run Time
0
Typical recharge time
3 h
Battery design life
8…10 year(s)
Battery Charge Power (Watts)
79 W rated
General
product web sub-family
Cloud-enabled monitoring
Redundant
No
Physical
color
Black with silver front bezel
Height
3.4 in (8.6 cm)
Width
17.2 in (43.8 cm)
Depth
12.5 in (31.8 cm)
Net Weight
35.9 lb(US) (16.3 kg)
Mounting preference
Lower
Mounting Mode
Rack-mounted
USB compatible
Yes
Input
Input protection type
Circuit breaker
Efficiency at full load
151...302 V adjustable
160...280 V
Input Frequency
50/60 Hz +/- 3 Hz auto-sensing
Output
Crest factor
3 : 1
Harmonic distortion
Less than 5%
Maximum configurable power in VA
1000 VA
Max Configurable Power (Watts)
800 W
Transfer Time
6ms typical : 10ms maximum
Topology
Line Interactive
Wave type
Sine wave
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz sync to mains
Conformance
Product Certifications
C-tick
CE
EAC
RCM
UK PSTI
Standards
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018
Environmental
Acoustic level
41 dBA
heat dissipation
70 Btu/h
Operating altitude
0...10000 ft
Ambient Air Temperature for Operation
32…104 °F (0…40 °C)
Ambient Air Temperature for Storage
5…113 °F (-15…45 °C)
Storage altitude
0…25000 ft (0.0000000000…7620.0000000000 m)
IP degree of protection
IP20
Relative Humidity
0…95 % non-condensing
Storage Relative Humidity
0…95 % non-condensing
Communications & Management
Audible Alarm
Audible and visible alarms
control panel
Multi-function LCD status and control console
Free slots
1
Communication port support
SmartConnect Ethernet port: for cloud monitoring feature availability varies by terms of use
Alarm
Alarm when on battery : distinctive low battery alarm
Surge Protection and Filtering
Surge energy rating
680 J
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : m
Ordering and shipping details
GTIN
731304402596
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.02 in (22.9 cm)
Package 1 Width
18.6 in (47.2 cm)
Package 1 Length
23.0 in (58.4 cm)
Package 1 Weight
41.006 lb(US) (18.6 kg)
Contractual warranty
Warranty
5 year repair or replace
Enter your zip code to see prices
Delivery of products may differ based on your Zip code

1000VA/800W line interactive pure sine wave 2U rackmount UPS
Ideal for small edge environment, back office, network infrastructure and IDF/MDF closets
Lithium-ion battery minimizes the need to replace battery during the lifetime of UPS